Lumitron - Thermal Imaging Products

Downloadable UC320 Spec:

UC320 Brochure

UC320 OEM Microbolometer Infrared Camera Specification

Lumitron introduces the fully customizable OEM Microbolometer Infrared Camera Module. This product allows the customer to select an FPA (DRS or ULIS at this time), select an optic (f #, focal length, motorized / manual focus), select a housing, select the I/O requirements and select their own product name (since this is your product). This camera will have your company’s look and feel including any labeling that you desire. These options can be selected from our existing solutions, can be fully developed by the customer and integrated into the product or designed to your requirements by our engineering staff. Lumitron will also consider other “320-class” FPAs for the camera module.

The Lumitron ECS320A Embeddable Camera Electronics System provides the foundation of the camera module. The ECS320A is comprised of three primary printed circuit board assemblies (each 2 inches x 2 inches). The ECS320A architecture includes an FPA-specific FPA Support Electronic PCB, a universal Camera Controller PCB and a universal Camera Support Electronic PCB. The ECS320A provides high-functionality imaging capabilities which include: FPA clocking / biasng / power generation, FPA analog video conditioning, FPA video analog-to-digital conversion (14-Bit), FPA non-uniformity correction (two point with ambient temperature compensation and run-time refresh), defective pixel replacement, dual 14-Bit in / 16-Bit out intensity transformation table (contrast enhancement / radiometric transforms), automatic gain and level control (linear or histogram equalization), interpolated horizontal remapping, display freeze and 2x zoom, standard format analog video generation (NTSC or PAL), 15 color full-screen bit-mapped symbology overlay onto video output, thermoelectric cooler control, calibration flag controller, and input power conditioning / regulation. An application specific Panel I/O PCB connects the ECS320A primary electronics to the external environment.

FPA Specifications

Specification UC320D UC320U
Manufacturer and Part No. DRS US3000 ULIS UL 03 08 01
Detector Type Microbolometer Microbolometer
Array Format 320 x 240 320 x 240 (NTSC)
384 x 288 (PAL)
Detector Substrate VOx aSi
Pixel Size / Fill Factor 51 x 51 µm / 60% 35 x 35 µm / 80%
Spectral Range 8 - 14 µm 8 - 14 µm
Dynamic Range > 1000:1 Typical > 1000:1 Typical
Operability >99.5% (Lumitron supplied) >99.9%
FPA Operating Temperature 25°C 25°C
NEdT (camera level) < 50 mK (w/ f1.0 optic) < 50 mK (w/ f1.0 optic)

Packaging / Cooler Specifications

Cooler Type Thermoelectric Cooler (TEC) Temperature Stabilizer
TEC Stabilization Time < 60 seconds
Package Type Hermetically Sealed Vacuum Package
Package Window AR Coated

Camera Performance (regardless of FPA selection)

Analog Video NTSC or PAL (factory set)
FPA Frame Rate 59.94 frames/sec NTSC, 50 frames/sec PAL
Digital Video 14 - Bit (uncorrected, corrected, pixel replaced); 16 - Bit (post transform)
Non-Uniformity Correction Tables Up to 4 available
Video A/D Resolution 14 Bits
Calibration Flag Ambient and Elevated Temp, Automated / Periodic One Point Refresh
External Timing External Sync and External Clock
Remote Control RS232, RS422 full duplex or RS485 half duplex (factory set)
Power Input +6 to +16 VDC, +16 to +25 VDC, or +25 to + 28 VDC (range factory set)
Power Consumption <4 W Steady State (2.75 W typical @ 25°C amb), <12 W at Startup (1 min)

Enclosure Specifications (overall camera packaging determined by OEM Customer)

Dimensions 3.00 in H x 3.00 in W x 5.25 in L minimal (w/o manual focus lens)
Weight 2.5 lbs minimal (w/o lens)
Operating Temperature -30 to 70°C (depending on Customer design)
Storage Temperature -40 to 85°C (UC320D); -40 to 70°C (UC320U)
Water Resistance NEMA 4 (depending on Customer design)
Humidity 10 to 95% non-condensing (depending on Customer design)
Connectors Quantity and Type determined by Customer

f/1.0 Optics (available in other focal lengths, f #s, fixed or manual focus)

Focal Length Minimal Focus FOV for UC320D FOV for UC320U
18 mm 2 inches 50° x 39° 34° x 26°
25 mm 12 inches 36° x 28° 25° x 19°
50 mm 22 inches 18° x 14° 12.5° x 9.5°
100 mm 36 inches 9° x 7° 6.2° x 4.7°
150 mm 60 inches 6.0° x 4.7° 4.1° x 3.2°

f/1.4 Optics (available in other focal lengths, f #s, fixed or manual focus)

Focal Length Minimal Focus FOV for UC320D FOV for UC320U
13 mm 2 inches 69° x 53° 47° x 36°
25 mm 12 inches 36° x 28° 25° x 19°
50 mm 22 inches 18° x 14° 12.5° x 9.5°
100 mm 36 inches 9° x 7° 6.2° x 4.7°
200 mm 120 inches 4.5° x 3.5° 3.1° x 2.4°

These Features and Specifications are subject to change without notice.